Motorräder Dortmund 2020

Turn Signals Stripe LED 3in1

Let there be light

Begin the new season top prepared with our 3in1 indicators. Stand out from the crowd and change your old turn signals against this super small 3in1 solution. Your old tail light can also be removed to give your tail an even cleaner look. With these turn signals there are tail light, brake light and turn signals in one housing!

Stripe LED 3in1 indicators for Thunderbike Inside Plate

Indicators with a unique design are produced in the in-house CNC milling machines. The 3in1 turn signals are milled from a single piece of aluminium and then further refined in various steps and fitted with brightly lit LEDs. The turn signals have an E-mark and come in pairs.

Our original Thunderbike Stripe turn signal set fits perfectly into our design lines and can be combined with our license plate frame Inside Plate. An unbeatable duo!

The Stripe LED 3in1 indicators are available in three popular colors:

  • polished
  • glossy black
  • black matt

Made in Germany

The installation may require a load equalizer.


License plate frame

Our Thunderbike license plate frame Inside Plate is one of our bestsellers and for good reason. It is made of high quality billet aluminum and encloses the license plate completely.

With its hidden retaining screws there are few number plate holders that allow such a clean and tidy look at the rear like the Thunderbike Inside Plate. As a result, the Inside Plate offers a perfect option for a central installation on the rear fender in combination with the 3in1 indicators or for mounting on one of our side mounted license brackets in combination with the M8 strut turn signals.

The universal 3in1 solution

The housing is milled from a single piece of aluminium and fitted with bright LEDs with toned glass.

The Thunderbike Stripe 3in1 turn signals M8 are ideal for use on the fender struts instead of the OEM indicators. The milled thread on the turn signal housing allows extremely small dimensions for the installation. The toned glass underlines their cool look even more. They fit perfectly into the Stripe Design series and are an ideal complement to our armature Stripe indicators. With these turn signals you can further individualize your bike and make it unique.

The turn signals M8 are available in black and polished.

Universal with M8 thread. Suitable indicator holders optionally available for many models. For mounting we recommend the use of a Turn Signal Load Equalizer.

Most Harley-Davidson models require increased resistance when converting to LED lights to avoid incorrect flashing frequency or other error messages/faults. Incorrect installation can cause the ABS indicator light to light up or even cause the rear wheel ABS to fail. To avoid this, a special resistor with a blocking diode has been fitted to the rear of Can-Bus models.

Load Equalizer for models without Can-Bus : Softail until 2010, Dyna until 2011, Sportster and Touring until 2013 including trike.

Load Equalizer for Can-Bus models : Softail from 2011, Dyna 2012-2017, Sportster and Touring from 2014 including trike.


Further examples


De Luxe



Nico Schnepel

Customparts, Dealer Support

0049 2852 - 6777-30
Send an email


Roman Reiners

Customparts, Dealer Support

0049 2852 - 6777-30
Send an email


Julian Segler

Sales, Financing, Rental, Custombikes

0049 2852 - 6777-41
Send an email


Thomas Emky

Custombikes Service Workshop

0049 2852 - 6777-56
Send an email


Stay up to date with the Thunderbike newsletter. In our free newsletter you will find news on our custom bikes & parts, information on Harley-Davidson models, all important dates & events, used vehicles, accessories, clothing, promotions and much more! The subscription can be terminated at any time by unsubscribing in our newsletter. We refuse to disclose your data to third parties. You will receive an e-mail confirmation after the subscription. So we make sure that no unauthorized person can register you in our newsletter.